Mobile check codes

:::::::::::::::APPLE IPHONE IOS දුරකථන සදහා ලිපියේ පහතම බලන්න::::::::::::::::

:::::::::::::::::Samsung ANDROID දුරකථන සදහා පහත සදහන් CODES බාවිතා කළ හැක::::::::::::::::::::::::

*#06# (Display IMEI number)
*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)
or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)
or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*782*# (Configure Network Lock NSP)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)


:::::::::::::::::LG ANDROID දුරකථන සදහා පහත සදහන් CODES බාවිතා කළ හැක::::::::::::::::::::::::

2945#*# : LG all models test mode
2945*#01*# : Secret menu for LG

*#06# : IMEI (ALL)
*#07# : IMEI and SW (LG 510):
*8375# : Software version (LG B1200)
*6861# : Recount cheksum (LG B1200):
#PWR 668 : Factory test (B1200):
1945#*5101# : Simlock menu (LG B1200)
2945#*5101# : Simlock menu (LG 510W, 5200)
2945#*70001# : Simlock menu (LG 7020, 7010)
2947#* : Simlock menu (LG 500, 600)

LG-U81XX SPECIAL CODES

Code to read phone version :

Phone without SIM
Enter 277634#*# or 47328545454#
Select ‘SW Ver.info’
Code to reset phone :

Phone without SIM
Enter 277634#*# or 47328545454#
Select ‘Factory Reset’
Code to enter UNLOCK MENU :

Phone wit SIM inside
Enter 2945#*88110#
Test Menu 8330 : 637664#*#
Test Menu 8180 V10a: 49857465454#
Test Menu 8180 V11a: 492662464663#
Test Menu 8130-8138: 47328545454#
Test Menu 8110-8120: 277634#*#


:::::::::::::::::Sony ANDROID දුරකථන සදහා පහත සදහන් CODE 1 බාවිතා කළ හැක::::::::::::::::::::::::

For All IN One =    *#*#7378423#*#*


:::::::::::::::::HTC ANDROID දුරකථන සදහා පහත සදහන් CODE 1 බාවිතා කළ හැක::::::::::::::::::::::::
Tested/Working Code:
##775# – EPST/PRL – PRL Settings
##786# – EPST – Status Menu
##3282# – EPST – Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL)
##2539# – EPST/A-Key – Data A key menu
##7738# – EPST/P_Rev – Protocol Revision
##8626337# – EPST/Vocoder – Unsure
##33284# – Debug – Debug Menu – (Debug Screen, Test Calls, RC Data, HDR/1X Selection, Voice Privacy, DTMF Set, Korea Mode Set)
##3424# – Diagnostic – Connect to phone in diag mode
##4772579# – Reset the GPS
##72786# – changes DSA back to Factory
##889# – enables TTY
*#*#34971539#*#* – update firmwire
*#*#7594#*#* – change the End Call / Power button action
*#*#273283*255*663282*#*#* – code opens a File copy screen where you can backup your media files
*#*#197328640#*#* – enter into Service mode
*#*#232339#*#* – WLAN test (Use “Menu” button to start various tests)
*#*#526#*#* – WLAN test (Use “Menu” button to start various tests)
*#*#528#*#* – WLAN test (Use “Menu” button to start various tests)
*#*#7780#*#* – Factory reset
*2767*3855# – Factory Format
*#*#232338#*#* – Shows WiFi MAC address
*#*#1472365#*#* – GPS test
*#*#1575#*#* – Another GPS test
*#*#232331#*#* – Bluetooth test
*#*#232337#*# – Shows Bluetooth device address
*#*#8255#*#* – launch GTalk Service Monitor.
*#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate
*#*#1234#*#* – PDA and Phone
*#*#1111#*#* – FTA SW Version
*#*#2222#*#* – FTA HW Version
*#*#44336#*#* – PDA, Phone, CSC, Build Time, Changelist number
*#*#0283#*#* – Packet Loopback
*#*#0*#*#* – LCD test
*#*#0673#*#* OR *#*#0289#*#* – Melody test
*#*#0842#*#* – Device test (Vibration test and BackLight test)
*#*#2663#*#* – Touch screen version
*#*#2664#*#* – Touch screen test
*#*#0588#*#* – Proximity sensor test
*#*#3264#*#* – RAM version

—– Was only able to get the following working on CM6 Rom —–
*#*#4636#*#* – Phone Information – “Phone information, Battery information, Battery history, Useage statistics, Wifi information” (froyo only)


Confirmed not Working:
##UPST# – modem directory
##778# – EPST – Advanced Programming

Unverified code:
##37872# – Full Speed USB Mode – Enable/Disable
##3386# – DDTM – Enable/Disable
*#0011# Service menu
*#0228# Battery Status
*#2454# Low Battery Power Off
*#0283# Receiver Packet loopback
*#0782# RTCTimeRead displays time (and seconds)
*#147852# Allows you to access many screens including CDMA DATA Connections
*#369852# Allows you to access many screens including CDMA DATA Connections
*#1472365# GPS Setup
*#232331# Bluetooth RF Test Mode
*#1575# Service menu
*#197328640# Service menu
*#2767*2878# Service menu
*#32489# Service menu
*#4238378# Service menu
*#6984125*# Service menu
*#7284# Service menu
*#9090# Service menu
*#2580# Service menu
*#2664# Touchscreen Firmware Version
*#2664# Main Firmware Update
*#3264# RAM Version
*#3282*727336*# Current Data State
*#745# Sec_RIL_Dump allows you to copy to phone memory, clear ril log, (greyed out copy to SDcard and view RIL log), exit
*#7450# Phone Dump Mode Disable
*#7451# Phone Dump Mode Enable
*#7780# Factory Reset
*#9900# SysDump copy logcat/dumpstate/dumpsys, enable debug log, copy watchdogdumpstatelog)

*#0*# – Test Utility – SAFE TO PLAY WITH
*#0289# Melody Test again?
*#0673# Melody Test SAFE TO PLAY WITH
*#0842# Vibration test SAFE TO PLAY WITH
*#2263# ??
*#2663# Touchscreen Accuracy Test SAFE TO PLAY WITH

*#767*3855# Factory Format – CRAP!! WARNING!!!


:::::::::::::::::Huawei  ANDROID දුරකථන සදහා පහත සදහන් CODE 1 බාවිතා කළ හැක::::::::::::::::::::::::

#8746846549 NAM SETTING & HARDWARE TEST
##1168453865 NAM SETTING & HARDWARE TEST
##5674165485 NAM SETTING & HARDWARE TEST
##147852 test mode
##8541221619 NV OR RUIM
##258741 restore
##3515645631 monitoring debug
##1857448368 version
*#06# esn

# Card does not boot, click on emergency call，Enter ##258741,Then launch keys, identification, you can reset the phone

Huawei ETS 668, 678, 688 Code for Debug mode

Test mode [##2][MENU][ Field service code ]
RF call [##5][Menu]
Debug screen [##44][Menu]
Debug screen [##33][Menu]


NV reset [##123][Menu]
CDG2 Test enable [##234][Menu]
CDG2 Test disable [##432][Menu]
Home only off [##460][Menu]
Home only on [##461][Menu]
Setup language china (ChinaTelecom) [##551][Menu]
Setup language eng/rus (SkyLink) [##552][ Menu]
Setup language eng/rus (Dialog) [##553][ Menu]
Initializing Phone [##777][Menu]
Enable to UIM and UIMless sw version [##846][Menu]
Setup factory mode only possible UIM sw version [##864][Menu]

and for huwai **951357 save

##159357 save ruim 2 non ruim or nonruim 2 ruim

Block debug code / Free debug code [##888][Menu]
Enable UTK Mode [##885][Menu]
Enable security mode [##456258##][menu][Service code ]
Use any card [*117049976#]

Huawei Secret Code.

#8746846549 NAM SETTING & HARDWARE TEST
##1168453865 NAM SETTING & HARDWARE TEST
##5674165485 NAM SETTING & HARDWARE TEST
##147852 test mode
##8541221619 NV OR RUIM
##258741 restore
##3515645631 monitoring debug
##1857448368 version
*#06# esn

##497613 2-System Test,5-Test Call, nam
##412365 sama sprti atas
##745698 version
##147852 test mode
##159357 R-UIM \ ROM-UIM
##258741 restore
##236985 == monitoring debug
*#06# – ESN
*+End – force download

##1236545874 Nam Setting & Hardware Test
##3214566871 Idem
##7412586793 Idem
##147852 Test Mode
##23895490582849521668 Nv Or Ruim
##258741 Restore
*#06# Esn
##2147683785 See Version
##3258967389 Same Above
##497613,2-System Test,5-Test Call, nam
##412365 sama sprti atas
##745698 version
##147852 test mode
##159357 R-UIM \ ROM-UIM
##258741 restore
##236985 == monitoring debug
*#06# – ESN

:::::::::::::::::Code to Reset Huawei Phone::::::::::::::::::::::::
If you'd like to restore your phone to its factory state (therefore clearing all of your phone's data),
enter in the following code: ##258741.


සාමාන්‍යයෙන් බොහා් ANDROID දුරකථන සදහා පහත සදහන් CODES බාවිතා කළ හැක

Secret Codes Functions
*#*#7780#*#* 1. Factory restore setting
*#*#7780#*#* 2. Clear all application and data.
*#*#7780#*#* 3. Remove Google account setting.
*#*#7780#*#* 4. Remove System, application data and settings.
*2767*3855# 1. Reinstall the phones firmware.
*2767*3855# 2. Used for factory format.
*2767*3855# 3. Remove all files and settings including the internal storage.
*2767*3855# 4. Reinstall the firmware.
*#*#197328640#*#* 1. Enabling test mode for service activity.
*#*#197328640#*#* 2. Used to enter into Service mode.
*#*#197328640#*#* 3. You can run and change various tests and settings in the service mode.
*#*#4636#*#* 1. Phone basic information.
*#*#4636#*#* 2. Phone usage detail.
*#*#4636#*#* 3. Battery information.
*#*#34971539#*#* 1. Information about mobile camera.
*#*#34971539#*#* 2. Get camera information.
*#*#34971539#*#* 3. Note:-Please avoid update camera firmware option
*#*#7594#*#* 1. Changing the power button behavior.
*#*#7594#*#* 2. Enables the direct power off without asking for selecting any option
                  (silent mode, Aeroplane and power off).
*#*#273283*255*663282*#*#* 1. Create backup to all your media files.
*#*#273283*255*663282*#*#* 2. Opens file copy screen where you can backup your media files like
                                (images, videos and audios).
*#*#8255#*#* 1. For Google Talk service monitoring.
*#*#8255#*#* 2. Used to launch G Talk Service Monitor.
*2767*4387264636* 1. Used to display product code.
*#0228# 1. Used to know Battery Status.
*#12580*369* 1. Software and Hardware Info.
*#32489# 1. Let you know Ciphering Info.
*#273283*255*3282*# 1. Data create menu.
*#3282*727336*# 1. Data usage status.
*#8736364# 1. OTA update menu.
2. GPS Bluetooth & WLAN Test Codes 2016
Secret Codes Functioning
*#*#526#*#* WLAN Test
*#*#528#*#* WLAN Test
*#*#232339#*#* WLAN Test
*#*#232338#*#* Displays/Shows WiFi MAC address.
*#*#1472365#*#* For quick GPS test.
*#*#1575#*#* Different type GPS test.
*#*#232331#*#* Bluetooth test.
*#*#232337#*# Displays Bluetooth device address.
3. Firmware Version Information Codes
Secret Codes Functioning
 *#*#1111#*#* 1. Let you know about FTA SW Version.
*#*#2222#*#* 1. FTA Hardware Version.
*#*#4986*2650468#*#* 1. Firmware Info PDA, Phone, H/W, RFCallDate.
*#*#1234#*#* 1. PDA and Phone firmware info.
*#2263# 1. RF band selection
*#9090# 1. Diagnostic configuration.
*#7284# 1. USB 12C mode control.
*#872564# 1. USB logging control.
*#745# 1. RIL dump menu.
*#746# 1. Debug dump menu.
*#9900# 1. System dump mode.
*#*#44336#*#* 1. Shows Build time changelist number.
*#*#44336#*#* 2. PDA, Phone, CSC, Build Time, ChangeList number.
*#03# 1. NAND flash serial number.
*#3214789# 1. GCF mode status.
4. Factory Tests Secret Codes
Secret Codes Functioning
*#*#0283#*#* 1. Packet Loop-back test.
*#*#0*#*#* 1. LCD test.
*#*#0673#*#* 1. Audio/Melody test.
*#*#0289#*#* 1. Audio/Melody test.
*#*#0842#*#* 1. Vibration test and Back Light test Device test.
*#*#2663#*#* 1. Displays Touch screen version.
*#*#2664#*#* 1. Touch-Screen test.
*#*#0588#*#* 1. Proximity sensor test.
*#*#3264#*#* 1. RAM version.
*#0782# 1. Real time clock test.
*#0589# 1. Light sensor test.
*#7353# 1. Quick test menu.
5. PDA and Phone Codes
Secret Codes Functioning
*#*#7262626#*#* 1. Field test.
*#06# 1. IMEI number.
*#*#8351#*#* 1. Enables voice dialing logging mode.
*#*#8350#*#* 1. Disables voice dialing logging mode.
**05***# 1. Execute from Emergency dial screeen to unlock PUK code.
*#301279# 1. HSDPA HSUPA control menu.
*#7465625# 1. View phone lock status.
6. Other Android Secret Codes
Secret Codes Functioning
*#0*# 1. Galaxy S3 service menu.
##7764726 1. Motorola DROID hidden service menu.
##7764726 2. The default SPC password is six zeroes(000000).
1809#*990# 1. LG Optimus 2x hidden service menu.
1809#*990# 2. When prompted for a code enter six zeroes(000000).
3845#*920# 1. Lg Optimus 3D hidden service menu.
3845#*920# 2. When prompted for a code enter six zeroes(000000).






:::::::::::::::::APPLE IPHONE IOS දුරකථන සදහා පහත සදහන් CODE 1 බාවිතා කළ හැක ::::::::::::::::::::::::::::::::::::::::::::::::::


Basically, there are a bunch of iPhone keypad codes that you can type in and get back certain information about the your mobile carrier, phone and billing details.

To use any one of these codes, open your iPhone’s “phone app” and make sure that the keypad button is selected in the bottom menu. Then, type in the code from the list below and press call.

iPhone Codes: Network & Phone Information

*3001#12345#*– Opens up the “Field Test” settings on your iPhone, which allows you to see many, many advanced network settings on your phone including cell site information and more.


*#06# – Displays your iPhone’s International Mobile Equipment Identity (IMEI) number (this code also works on many other phones).

iPhone Field Test Mode

*#21# – Displays any call forwarding settings enabled on your iPhone.

*#43# – Shows you if call waiting for various parts of your phone are either enabled or disabled.

*#30# – Shows you if you have the call presentation (to see who is calling you) setting enabled or disabled.

*#33# – Displays call barring settings for your iPhone, and weather they are enabled or disabled.